To change the sample rate of your Windows settings please follow the instructions below:
- Navigate to Control Panel > Sound > Playback > Right click on Scarlett 18i20 > Properties > Advanced. Under Default Format change the Sample Rate to that of your DAW. Press Apply and then OK.
- Navigate to Control Panel > Sound > Record > Right click on Scarlett 18i20 > Properties > Advanced. Under Default Format change the Sample Rate to that of your DAW. Press Apply and then OK.
Thursday, November 27, 2014
Focusrite Does Me a Solid
So I had a weird issue with my Focusrite Scarlett 18i20 but Louie Gonzalez at Focusrite tech support did me a solid and figured out why my interface was obnoxiously flipping back to 44.1 from 48k all on its own.
Fantasizing about building microphone(s). The Schoeps circuit seems to be the way to go. It's a simple circuit but it weirdly has a lot ...
I tried to repair a cheap flute by putting new pads on it. This did not work. It did, however, make an aesthetically pleasing mess. Pro...
Here I talk more about the Kemper Profiler. I go on a bit compared to the last video and show you some different sounds. Here's som...